Hi all Is the front wheel spindle the same across the 675 triple bikes (it looks it from pictures but not sure if different sizes) Plus the spacers - are they different (I would imagine it would be so....)? Cheers Andy
The "World of Triumph" is a useful place to check out this sort of compatibility imho. https://www.worldoftriumph.com/collections/100062103-1-2?type=daytona-675-from-vin-564948 It seems to me that the spindle is part number T2000650 The same on Street triples etc, but best check yourself against your exact model & the exact model you can source. Hth.
I've dismantled a few 2006-2012 Daytonas and Street Triples, and the front spindle has been the same on all those
Just used the link StM supplied and it is used on a load of different Triumph models including the pre 2013 Daytona! Even the older Speed Triple! Found one on Ebay for 25 incl P7P or I can buy a brand new one plus 2 new spacers for 75 incl P&P !!
Got the spindle out and doesn't look too bad but getting another one next week so shall see which is the better. Ordered 2 new spacers as one of mine was in a poor state - from Fowlers at £3 each so not too bad. Just need to suss out how to get the bearings out now (will see if the family over the road has a puller as they seem to have everything else!) Got the replacement disks brakes now so hopefully can get it back on the road to travel down to Peterborough on Friday.
Replacement disks are for the pre-2013 Daytona (dished) so will not work on my bike. I think I will struggle to get any before Thursday now so not looking good for Friday Anywho, new bearings now fitted and looking good Cheers
