675.cc • Triumph 675 Forum

Gen 1 Parts Clear Out

Discussion in 'For Sale' started by Simmo, Jan 24, 2026.

  1. Simmo

    Simmo

    Thread Starter

    36
    4
    8
    Location: Holmfirth
    All original Triumph parts in good condition, taken from 2007 Gen 1 675 in Caspian Blue. Some of these may fit Gen 2 also;

    Screen £20 SOLD
    Gel Seats rider and pillion £50
    Mirrors £20 SOLD
    Headlight and fairing £80

    photos won’t upload but happy to send by WhatsApp if any interest.

    Happy to post out all apart from the headlight fairing which I will only do so at buyers risk due to the fragility of the uprights.

    collection near Holmfirth West Yorkshire if preferred
     
    Last edited: Jan 27, 2026
  2. scaramanga

    scaramanga

    2,715
    196
    63
    Location: whitehaven
    gel seats can be hard to get at times and there are different types
    id say £50 not too bad
     
  3. Just a heads up, Caspian Blue wasn't a gen1 colour. It was only available at the end of gen 2. Neon blue is probably the colour your have.
     
  4. StMarks

    StMarks PTG

    13,234
    999
    113
    Location: HU15 2DS
    You're right Renboy, but the image in his avatar looks at first to show a Caspian (brighter blue & had the gold wheels, where Neon blue had the graphite wheels).
     
  5. Simmo

    Simmo

    Thread Starter

    36
    4
    8
    Location: Holmfirth
    Hi. I knew someone would spot that on here. It is definitely Caspian blue, I didn’t realise when I bought it but the previous owner must have swapped the fairings (and the wheels too I think). I assume that the gen 1 and gen 2 fairings were the same fit????
     
  6. Simmo

    Simmo

    Thread Starter

    36
    4
    8
    Location: Holmfirth
    The bike in the avatar is the bike in question. Looks a bit different now as a track bike (also Caspian blue). Its 2007 so can only assume fairings were changed before I bought it
     
  7. StMarks

    StMarks PTG

    13,234
    999
    113
    Location: HU15 2DS
  8. Simmo

    Simmo

    Thread Starter

    36
    4
    8
    Location: Holmfirth
    Yeah thanks I’ve taken it off now. It doesn’t have any markings on it so not sure who the manufacturer is. I’ll probably keep it on the track bike and delist the original at some point.
     
  9. StMarks

    StMarks PTG

    13,234
    999
    113
    Location: HU15 2DS
    It almost certainly doesn't have any markings because the Triumph certification stamp states that it is intended for closed circuit use & not compliant with highway regulations. Because that useful information can be readily seen by an MOT tester, it is "not unknown" for owners to take an abrasive metal polishing disc to that section of the silencer before installing it. I would expect that if you look very carefully at the underside section at the intake end you may just be able to see the evidence..
     
  10. Simmo

    Simmo

    Thread Starter

    36
    4
    8
    Location: Holmfirth
    Makes sense, thanks for the info
     

Share This Page

Loading...
  1. By using this website you agree to our Cookies usage. We and our partners operate globally and use cookies, including for analytics, personalisation, ads and Newsletters:
    Dismiss Notice