since you ran out of adjustment at the throttle, you will have to adjust the cable down by the throttle bodies
no, it should not be "slack-free". you set the play as per the manual. have mine set to about 2mm
I found the culprit, a shoddy cam tensioner o-ring[IMG]
Internal clearances? We are talking about a cam chain tensioner that's adjustable, not rod bearings LOL I will check for straightness today when...
Got a few things accomplished over the weekend. New tires installed(rs11 front/rs10 rear, installed quick bleed scews on the front calipers, did...
Wow, I thought I had responded to this, sorry. I don't think it stressed and broke due to the extended setup. A few years back, I had set my bike...
You guys "thought" the center bushing will just slide right in with ease. Definitely not the case. Since it took effort to get it out, I assumed...
I think I'm lined up and have the basket all the way pushed in. The front edge of the split primary gear on the outer basket is really close to...
I did, but it fell out, and I reinserted it. Best I have on hand is a punch. Not sure where I'm supposed to get a 6mm tapered pin from.
That's what I was doing, pulling the chain to get the 5 nipples lined up with the outer basket. Its like the outer basket doesn't go in far enough...
I got the gear change shaft swapped over, but for some reason I can't get the outer basket in right. I have the primary split gear aligned, but I...
I just removed the shift change shaft on the gen1 engine I have in the garage. Knocked off the center nut with an impact gun, center nut was not...
I found this after I posted this thread. According to the Triumph shop manual I have, it says to remove the engine and split the case. INSANE....
Okay guys/gals, my gear change shaft broke, I'm completely screwed! I thought I would be able to remove the gear change shaft from behind the...
What does my location or hand size have to do with how many degrees a motorcycle throttle twists?
I'm positive, the cam on the 1050 tune is a little bigger. I'm not the 1st person to complain about this mod, I've heard it before. I figured I'd...
Did the 1050 throttle tube mod and went for a nice long ride. 1050 throttle tube made no noticable difference, still have to be a contortionist to...
I think I may have some of these laying around, but wouldn't this be the same exact thing as the Motodynamic flasher relay I already am using?
I disconnected the tail light, and the flush mounts work properly. My guess is that my brake light flash module is causing some kind of...
You stopped answering my texts on July 9th, and the only reason I got a response from you now is because I called you out in your thread, which I...
