midgey46 project thread 2007 Daytona 675

Rather late but better that than never!

For those of you who like to look at other bikes or get ideas etc like myself I thought I'd start this to show the work iv done

Had my bike since April last year now, bought her (Daisy) for £5200 with 6k on it, came with the following:
GB Protection Kit
TOR Can
R&G Tail Tidy



Was a minter! Until about 4 weeks later I went to he Nurburgring and got T-Boned

So after spending a few £££ to get her back into good shape then came the project...

After all my 'Rank' on here is 'Fashion Victim' for a reason..

A rough list as it stands now is:
1. Arrow Titanium Stage 3 System
2. Cordona Quickshifter
3. Power Commander 3
4. Pazzo Levers
5. 1050 Throttle Mod
6. K&N Air Filter
7. Renthal Medium Grips
8. Preload Adjusters
9. GB Racing Full Kit
10. Double Bubble Screen
11. Seat Cowl
12. Pillion Peg Blank Plates
13. Led Side Lights
14. Xenon Headlight
15. Carbon Cockpit Infills
16. Carbon Rear Hugger
17. Carbon Chain Guard
18. Carbon Heel Guards
19. Carbon Tank Pad
20. Powdercoated Rearsets
21. Renthal Front Sprocket
22. DID Gold Chain
23. Supersprox Rear Sprocket
24. Mirrors Removed
25. Triumph LED Indicators
26. 8x6 Reg Plate
27. Evotech Radiator Guard
28. Custom Tail Tidy
29. Ohlins TTX Rear Shock
30. EBC Brake Pads
31. Black Air Intake Mesh
32. Pro Bolt Screen Kit
33. Galfer Front Discs
34. Stainless Rear Axel Nut
35. Pirelli Supercorsa SP Tyres

Soon to add thanks to Wobbley
36. Racing Velocity Stacks

Like I said rough, a few bits are missing and some maybe aren't worth putting on the list! Also quite a few bits I have bought but changed and not put on there or they aren't on the bike so aren't on there

Some recent pics






Will try and put some stage by stage pictures on of me adding things in a 'how to' kind of way, any questions feel free to ask

Cheers all!

 

Good work fella, nice spec ; )

 

Nice

 

I can vouch for how clean this bike is you could eat your dinner off it.

And she goes like a rocket

 

Nice volume of work done here haha!!

Sent from my LT30p using Tapatalk 4 Beta

 

Cheers fellas! Should hopefully have a few more parts on the way soon......

 

Latest purchase!



Velocity Stacks

 

you've been done....one's shorter than the rest

 

You will need to remap Connor to get best out of them

 

Yeah ill be leaving them for a week or so maybe, then pop them in and nip it round to BSD

 

How is the powder coating on the peg holding up I was thinking of doing mine but I have it in my head may rub off in no time??? Cheers.

 

Very surprisingly they are holding extremely well!.. Was expecting some moderate wear as it was a cheap job, £15 for them both

No wear at all yet, had them like this now for 3 months I think. Had the passenger ones done too now for when I do use them

 

Funnily enough since making this thread I havnt done all that much!!

Well.. If you can call this something?


My 'stop' sticker... Oh the shame..


Also the Ohlins reservoir sock

 

Slacking.

 

Well it's now booked into BSD once again for a re tune!
06/08/13, will have the velocity stacks, going to clean the K&N filter whilst I'm there, also running on V-Power now so see what it makes now!

Selling some crappy coilovers I stupidly bought for my car, so any money made will be for the bike

On £124 at the moment so a few things could be bought potentially!

 

I'd need to sell 7 sets of coil overs to cover my bill!!!

Should be awesome when done though for both our bikes.

You'll be knocking on for 120 at the back wheel no?

 

Yeah at BSD Dyno, they usually get between 5-10bhp less than T3 Dyno

Just use different software etc

 

Another small mod, a bit on the tart side perhaps?

HRC Rear Brake Reservoir Kit

Only £8

Easy enough to fit, pinched... I mean borrowed a P-Clip from work so I could mount it in the original place.

Had to trim the pipe about an inch or so but the diameter is spot on! And you get all the bits you need (accept a mount, it is HRC not Triumph though)



Fitted immediately




Basically just took the original reservoir off, trimmed the HRC, put it on, then filled it up and gradually bled the system

Job done!

 

That looks quite neat